Drilling Equipment Sales, Inc., Your Home for Drill Rigs, Drilling
Equipment, Water Trucks, Pump Hoists, Grouters, and parts and accessories for
the drilling industry.
 |
2515
HWY 70 SW Hickory, NC
28602 • Tel: 828/322-3056 • Fax: 828/322-4042
|
|
|
|
| Introducing the
NEW ProDrill DE500 from
DES: |
|
The Truck is a 2006 Ford
F550 4x4, cab and chassis, 165” wheelbase, 6.0L power stroke diesel,
6-speed transmission, air conditioning, cruise control, AM/FM stereo, locking
rear differential, extra heavy duty front and rear suspension. The truck is
rated at 19000 GVW.
The pump Hoist is a Pulstar 8000E. This modified
machine is designed for single line application only. The maximum single line
pull is 4000 lbs. Maximum single line speed is 140 fpm. The hoist is equipped
with remote control, aluminum pipe racks with rack straps, wire spool mounts,
hydraulic oil cooler, HD tailgate. The hoist is equipped with a 3/8 x 125 ft
cable and 4-ton swivel hook.
The Pulstar pump hoist has been modified
to accept the drilling attachment. The hoist must be specially ordered to
accept this attachment. The drilling attachment cannot be retrofitted to a
hoist already in the field.
The pull down cylinder of the drill
develops app. 10000 lbs of pull down pressure, and app. 5600 lbs of pullback
pressure. The speed and pressure is infinitely adjustable at the operators
console.
The tophead develops app. 1650 ft lbs of torque. The speed and
pressure are infinitely adjustable at the operators console. The tophead is
also equipped with a breakout feature that is also controlled at the operators
console.
The mud pump is a hydraulically driven Centerline 7½ x
10 duplex pump. With the deck engine hydraulic system, it should deliver app.
190 GPM @ 225 PSI @ 25 strokes per minute. The deck engine high idle speed is
at the operators console. For this function, the deck engine needs to run @
app. 1850 RPM.
The IR air compressor mated to this hydraulic system
will deliver app. 90 CFM of air @ a maximum of 175 PSI. The deck engine manual
throttle needs to be set @ 2250 RPM to accomplish this.
The mud pump or
air compressor can be conveniently selected by the hydraulic control valve
located under the rod rack. The operator at the operators console can select
either function as on or off.
The deck engine is a Deutz diesel 65 HP
(4) cylinder air/liquid cooled engine.
The drill rod is a new state of
the art aluminum heavy wall pipe, weighing only 33 lbs per stick. It is easy
for one person to handle, therefore eliminating the need for a rod loader
device. |
|
Mouse Over a Feature Picture for Details.
Click on
Thumbnails to Enlarge! |
|
  |
 |
  |
|
|
|
|
| |
|
|
 |
|
(Get a Quote on Available Equipment from
DES) |
|
|
Drilling Equipment Sales, Inc., Your Home for Drill Rigs, Drilling
Equipment, Water Trucks, Pump Hoists, Grouters, and parts and accessories for
the drilling industry.
|
|
|