Drilling Equipment Sales, Inc., Your Home for Drill Rigs, Drilling Equipment, Water Trucks, Pump Hoists, Grouters, and parts and accessories for the drilling industry.

2515 HWY 70 SW Hickory, NC 28602 • Tel: 828/322-3056 • Fax: 828/322-4042

750 Heli-Drilling Rig

Spencer Harris Style Heli-Drilling Rig Features

117' Telescopic Mast
- Hydraulic Raised
- Mechanical Telescoping
- 300K Static Hook Load Rating
- Folding Racking Board with Handrail
- Racking Capacity - 8000 Ft. (4 ½" OD Drill Pipe) Plus Drill Collars
- 5 Sheave Cross - Over Type Crown Block
- With 4 - 30" & 1 - 36" Roller Bearing Sheaves
- Grooved for 1 ½" Diameter Drill Line
10' FIDE x 32' Long Gooseneck Trailer
- With 3 Axle - 90K Suspension
- With Full Length Walkways with Handrails
Deadline Anchor
- Stairs - One Set
Rotary Substructure Section
- 8' wide x 30' Long x 17' High
- 15' Clear Height Under Rotary Beams
- 375K Static Rotary Load Capacity
- Handrails
- Stairs - One Set
Pipe Setback Substructure Section
- 250K Static Setback Load Capacity
- Handrails
- Stairs - One Set
Simultaneous Static Substructure
- Capacity 550k

Trailer Ramp
- 8' Wide x 30' Long 17' High
- With Folding Stabilizer Jackscrews
- With 8' Wide x 18' Long x 2' - 9" Removable Pony Ramp
Spencer Harris 7000 Drawworks
- 750 HP Input
- Drum with LeBus Grooving for 1 1/8" Drill Line
- Rotary Drive
- 224 Auxiliary Air Brake
- Eaton Air Clutches
- 32" Low
- 22" High
- 16" Rotary Drive
- 16" Engines
- 2 Engine Compound
- 2 Caterpillar C13 Engines with Oilworks Torque Converters
- Oilbath Chainguards with Spray Lubrication
- Chain Drives
- 1 ¼" Triple @ Drum Drive
- 2" Single @ Drum Drive
- 2" Single @ Rotary Drive
- 1-½" Double @ Auxiliary Brake
- Hydraulic Pump/System for Mast/Trailer Functions
- Make-Up/Break-Out Catheads
- 42" x 8" Water Circulating Dum Brakes
- Diller's Console with Controls and Instrumentation

Model 7000 Drawworks Specifications

750 Rated Input Horsepower
Drum Size: 14" x 39"
LeBus Grooving 1.125" Drill Line
Auxiliary Brake Eaton 24 WCBD
Drum Clutch - Low Eaton 32CB525 #75
High Eaton 22CB500 #75
Rotary Drive Clutch Eaton 15CB500
Engine Compound
with Torque Converters 2 @ 350HP Each
Engine Clutches 16CB500
Catheads (Optional) TORQ-TITE 16"

Flo-Draulic
Max Drum Speeds
Low (Engine @ 1260 RPM w/ TC) 140 RPM
High ( " @ 1800 RPM w/o TC) 544 RPM
Rotary Countershaft Speeds
Low (Engine @ 1260 RPM) 163 RPM
High ( " 1800 RPM) 634 RPM
Hook Load Capacity 300,000 LBS.*
Skid Dimensions 7'-11.5"W X 28'L
2 Mud Mixing Hoppers

* This information is for reference only. Actual capacities are determined by engine/torque converter combinations.

Electrical Installation for one (1) 750 HP Land Rig

1. Electrical Switchgear & Rig Up

AC Power to be from Two (2) Cat C-18 with 545 KW Engine 480 volts, 3 phase, 60 Hz Generators.
One (1) Nema 1A Generator Control Panel (90"H x 48"W x 42"D)
With 2000 Amp Main bus and continuous copper ground bus
Generator Metering display modules each with 2-1200 AF electrically operated, fixed generator circuit breakers, LT/ Inst w/aux contacts & 24 VDC shunt trip
1-1200 AF manually operated, fixed feeder breaker
2-Multifunctional Generator Digital Meters
1-Automatic Synchronizer
2-Breaker Control Switches
2-Engine HOA Switches
1-Sync Mode Switch
2-Under/Over Frequency relays, BE-3 Type
2-Reverse Power Relays, BE-3 Type
2-Reverse Power Shutdown lamps, LED Type
2-Voltage Adjust switches
2-Pilot Relays
2-Woodward Load Control Modules
2-Load Sharing Relays
1-ESD pushbutton with protective shroud
1-Summary Alarm Output
1-Sonalert
2-Voltage Nominal Relays
1-Alarm Silence Switch
1-Alarm Reset Switch
1-Sync check relay, Basler Be-3 Type
4-Metering Potential Transformers
1-Syncscope
1-Incoming Digital Volt/ FrequencyMeter
1-Running Digital Volt / Frequency Meter
2-Sync Lamps
2-Control Power Transformers
6- Current Transformers
1-Interior Lamp with receptacle
1-Lot of Nameplates
1-Lot of control fuses
1-Component and wire identification tags

2-Space Heaters with thermostat
1- Distribution Panel for 480 volt 3 Phase, 4 wire 60 Hz to include:
2000 A MCB with 24 VDC shunt trip
2-75 HP Mud Mixers #1-2 remote Nema 7 starters with stop/ start
2-50HP Desander, Desilter, Mud Transfer Pumps remote Nema 7 starters with stop/ starts
3-50 HP Charging Pumps # 1, 2 & 3 interlocked to Triplex Pumps
2-40 HP Water Pumps # 1 & 2 with Nema 7 Starters
2-75 HP Air Compressors
1-30 HP BOP/ Accumulator
1-15 HP Wireline unit
2-20 HP Trip Tank pumps with Nema 7 Starters and start/ stop controls
1-Feeder for Suction Tank Nema 7 Panel with 1-10 HP Mud Agitators
1-Feeder for Intermediate Tank Nema 7 Panel with 3-10 HP Mud Agitators
1-Feeder for Shaker Tank Nema 7 Panel for 25 HP Dual Linear Shaker, 1-2.5 HP Desilter, and 1-7.5 HP Mud Agitator
1-75 HP Centrifuge Pump with VFD Controls
2-5 HP Fuel Pumps with Nema 7 Starters and start/stop controls
2-3 HP Liner Spray pump with pressure switch interlock with Main Mud Pumps
2- Distribution Panel for 120/208 volt / 3 Phase 36 circuit 3 phase, 4 wire to include:
200 A MLO
6-100 AF 3 pole circuit breakers for:
1-100/3 Nema 7 Rig Floor Panel in Dog House
1-60/3 Change House / Parts House
2-60 Amp 3 Pole Spare
2-30 Amp 3 Pole Spare
4-100 AF 2 Pole for:
2-100/2 for Company Trailer and Tool Pushers Trailer
2-100/2 Spare
10-20 AF 1 pole circuit breakers for:
8-20/1 Lighting and convenience loads
2-20/1 Nema 7 Pressure Switch for Triplex Pump interlock to Liner Spray pumps.

Electrical Wiring and Field Loads for:

Mud Tanks (3) and Mud Pumps (2) thru ground tray
Receptacles to be standard rated Appleton or equivalent at Generator House
480 volt loads
2-60 HP Mud Mixers with Nema 7 Starter with Stop/Start
3-50 HP Desander/ Desilter/ Mud Transfer Pumps with Nema 7 Starters with Stop/Start
2-50 HP Super Chargers # 1 & 2
1-40 HP Air compressor with Nema 4 Starter with Stop/Start in Generator House.
2-40 HP Water Pumps with Nema 4 Starters with Stop/ Starts
1-30 HP BOP Unit (CFE Starter)

2-20 HP Trip Pumps with Nema 7 Starters and Stop/Starts
1-Shaker Tank Nema 7 Panel Feeder for 1-Dual-2.5 HP Shaker,1-2.5 HP Desilter and 1-10 HP Mud
Agitator with Starters and Stop/Starts. ( shaker to have plug and receptacles for removal if required.)
1-Intermediate Tanks Nema 7 Panel Feeder for 4-10 HP Mud Agitators with Starters and Stop/Starts
1-Suction Tanks Nema 7 Panel Feeder for 3-10 HP Mud Agitators with Starters and Stop/Starts
1-15 HP Wireline Unit
3-3 HP Liner Spray Pumps with Nema 7 Starter and Nema 7 Pressure Switch interlock

208/120 Volt Loads

2-100/2 Company trailer
1-60/3 Rig Floor Panel
1-60/3 Warehouse / Mechanics Shop-Spare

6-20/1 lighting and auxiliary loads
2-30/3 Spares

2. Lighting System to be 120/208 Volt 60 Hz

Mast 117 FT. with 17 foot substructure Lighting System
- All fixtures will be provided with Class 1 Division 1 Explosion Proof receptacles and plugs.
- Each lighting string will be provided with receptacles and plugs as needed for rig moves.
Mast Lighting
- Eleven (11) Class 1 Div 1 fluorescent fixtures for mounting on mast
- Aircraft Obstruction lighting
- One (1) obstruction Class 1 Div 2 lights mounted on Crown and one additional near racking board.
Rig Floor Lighting
- Four (4) Class 1 Div1 fluorescent fixtures
Dog House Lighting
- Two (2) Class 1 Div 1 fluorescent fixtures for mounting in Dog House.
Substructure Lighting
- Two (2) Class 1 Div 1 fluorescent fixtures
Rig Floor Nema 7 Panel Explosion Proof with the following circuits:
- 1-20/1 Circuit Breaker for Dog House/ Spare
- 2-20/1 Circuit Breaker for Mast Lighting
- 1-20/1 Circuit Breaker for Obstruction Lights (2)
- 2-20/1 Circuit Breaker for Drawworks/ Area Lighting
- 2-30/3 Circuit Breakers for Spares (10 HP Max 208 Volt)
- One-(1) Generator House
- 6- Six (6) Class 1 Div 2 fluorescent fixtures for mounting inside Generator House.
- 2-Two (2) Class 1 Div 2 Floodlights with brackets for roof mounting
- Koomey Unit Lighting (1) Skid
- One (1) Class 1 Div 2 fluorescent fixtures on unit with mounting stanchions

Shaker Tank Lighting
- Four Class 1 Div 2 Vapor Proof 400 Watt Mercury Vapor Floodlights fixtures for Area Lighting.
- Four (4) Mounting stanchions one per floodlight
- One (1) Class 1 Division 1 Fluorescent Fixture (Porch light)
Intermediate Tanks (2) Lighting
- Four Class 1 Div 2 Vapor Proof 400 Watt Mercury Vapor Floodlights fixtures for Area Lighting.
- Four (4) Mounting stanchions one per floodlight
- One (1) Class 1 Division 1 Fluorescent Fixture (Porch light)
Suction Tank Lighting
- Four Class 1 Div 2 Vapor Proof 400 Watt Mercury Vapor Floodlights fixtures for Area Lighting.
- Four (4) Mounting stanchions one per floodlight
- One (1) Class 1 Division 1 Fluorescent Fixture (Porch light) Lighting
Mud Mix House
- Three (3) Class 1 Div 1 fluorescent fixtures with mounting stanchion
- Mud Pump Lighting (3) Skid
- Three (3) Class 1 Div 1 400 watt floodlights with mounting stanchion
Electrical/ Mechanical Shop
- Four (4) Class 1 Div 2 fluorescent fixtures (2 per shop) with additional spare 120 volt receptacle and plug for convenience.

3. Electrical Rig up Labor

4 12000 gallon fuel tanks
2 350 bbl rig water tanks
Mud System
800 bbl active Two TTL 1200 gpm shakers 10.5 agg, mud guns 55 bbl trip tank

55 bbl slug handrails and light grading all tanks are approx 7400 lbs
See the following electrical attached
Mcm 5x6 75 hp circulating system

11" X 5000# SHAFFER LXT DOUBLE

Description:

Shaffer Type "LXT" Hydraulically Operated Double Blowout Preventer. 11" vertical bore 11" 5,000 psi
WP, internal H2S trim. Manufactured in accordance with API Specification 16A, Third Edition, June 2004 and NACE MR0175 per API Specification 16A, Temperature T20.
"Boltless door" assembly (U.S. Patent 5,897,094/5,975,484) utilizes time-saving twin lock bars to manually lock and unlock the door bonnet from the BOP body. The manual lock process is accomplished by pulling
(2) individual round lock bars to disengage the door bonnet. The groove and lock bar pairs are located both above and below the ram cavity spanning the interface between the bonnet and the BOP body.
Ram change accessibility is accomplished by sliding the operator away from the body along two support rods (no hinge bracket or door swing). Ram removal is accomplished by sliding the ram from the ram shaft foot onto a ram extraction tool that pivots around the BOP body allowing overhead access to the ram block.
Complete with all standard accessories including Two (2) T- handles.
Two (2) set of rams are included in pricing. All BOP's will be delivered with 4"
Pipe Rams installed in the bottom cavity and CSO Rams in the top cavity.

Summary of Selected Options:

Top Connection: Studded, 11" 5,000 psi WP, R-54 Package Package
Bottom Connection: Studded, Package Package
11" 5,000 psi WP, R-54
Side Outlets: Studded, 3-1/8" 5,000 psi WP, R-35 Package Package
Quantity four (4)
Stainless Steel Inlay, Top Connection: Package Package
Stainless Steel Inlay, Bottom Connection: Package Package
Stainless Steel Inlay, Side Outlets: Package Package
Inconel Inlay Top Connection: No N/A N/A
Inconel Inlay Bottom Connection: No N/A N/A
Inconel Inlay Side Outlets: No N/A N/A
Hand wheels PN 115050: No Package Package
U-Joint PN 202007: No Package Package

Ram Assembly 11" X 4" D X 3,000/5,000 psi WP

Approximate Weight: 130.0 lbs
Drill Pipe Ram Assembly 11" X 4"D X 3,000/5,000 psi WP, H2S, with hang off capability.
- Dim. 16.375" X 10.678" X 4" approx.

Ram Assembly 11" X CSO X 3,000/5,000 psi WP

Part No.: 20021363 / Approximate Weight: 130.0 lbs
Drill Pipe Ram Assembly 11" X CSO X 3,000/5,000 psi WP, H2S.
Dim. 16.375" X 10.678" X 4.5" approx.

Quote Summary:

(1)- 11" 5M Double LXT BOP Assembly
(2)- Ram Assembly 11" X 4" D X 3,000/5,000 psi WP
(2)- Ram Assembly 11" X CSO X 3,000/5,000 psi WP
(1)- Documentation, Certificate of Conformance
(1)- Domestic Packing and Crating

111" X 5000# SHAFFER SPHERICAL

"New" Condition- 11" X 5,000# Shaffer Spherical Annular BOP, c/w Internal H2S trim. Manufactured by National Oilwell Varco & Made in The U.S.A. The Shaffer Spherical is manufactured in accordance with API Specification 16A, Third Edition, June 2004 &NACE MRO175 per API Specification 16A. Manufactured in the United States by OEM Shaffer- National Oilwell Varco in the 4th Quarter of 2006.

API Certified-Spec 16D License 0028, ISO 9001:2000 Tuesday, December 01, 2009

1.0 Fluid requirements 8 station BOP Closing Unit

Item Description Make and Type Size/Press
Close
Gals
Open
Gals
Close
Ratio
Open

Ratio Volume

Annular Hydril - GK 13-5/8 in - 5000 psi 17.98 14.16 0.00 0 50.12
Pipe Cameron - U 13-5/8 in - 10000 psi 5.54 5.42 7.0:1 2.3:1 16.50
- Blind
- Cameron - UBlind
- w/Shear
- Booster
  - 13-5/8 in - 10000 psi 11.60 10.90 14.0:1 2.3:1 34.10
Pipe Cameron - U 13-5/8 in - 10000 psi 5.54 5.42 7.0:1 2.3:1 16.50
Choke 1 HCR 4-1/16 in - 10000 psi 1.00 1.07 0.00 0 3.07
Kill 1 4-1/16 in - 10000 psi 1.00 1.07 0.00 0 3.07
Choke 2 4-1/16 in - 10000 psi 1.00 1.07 0.00 0 3.07
Kill 2 4-1/16 in - 10000 psi 1.00 1.07 0.00 0 3.07

Volume Required = 126.43 Gals

TOTAL ACCUMULATOR VOLUME REQUIRED

Pre-Charge Pressure = 1,000 psi
Unit Operating Pressure = 3,000 psi 0.36646
Minimum Pressure = 1,429 psi 353.384
Bottle Size = 15 Gals 24
Fraction of Total Volume (or of a bottle) that is Usable = ( 1000 / 1429 ) - ( 1000 / 3000 ) = 0.37
Total Accumulator Volume Required = 126.43 / 0.37 = 341.70 Gals
Total Bottles Required =341.70 Gals / 15.0 Gals/bottle = 23.0 Bottles
Number of 15.0 Gal Bottles Required 23
Pre-Charge Pressure
Minimum Pressure Unit Operating Pressure
Pre-Charge Pressure
Fraction of Total Volume that is Usable =

**Fluid requirements for unit based on calculations of Table 1.0 for requirements of unit having accumulated control fluid under atmospheric pressure. Usable fluid of bottles is equal to fluid required to Close/Open/Close all BOP Stack functions and close all valves. Final stack configuration must be provided by customer prior to work order to ensure proper sizing**

2.0 Accumulator Module E7S15.24

2.1 New carbon steel 430 gallon fluid reservoir tank. Tank complete with baffles and inspection port. Tank is designed to accommodate 6 selector valves all plumed to a common manifold supplied by 4 way Bypass Valve with 2100 Series hydraulic pressure regulator to shift between regulated or full system working pressure, 4 way Annular valve with 3100 Series/Fail Safe and Gauge Panel to monitor Accumulator, Manifold and Annular pressures.

2.2 (4) - 6 port machined steel tube bottle manifolds rated for 5000 psi working pressure. Manifold is machined from a single piece and MPI tested with certificates available. Isolation of manifold is controlled with a 1" 5000 psi ball valve. Manifold is bled back into the reservoir through a 5000 psi ½" needle valve.

2.3 (24) - 15 gallon 3000 psi, top loading bladder type accumulators are inspected and hydro-tested to 4500 psi. UA-1 Certificates provided.

2.4 (2) - ¾" Pressure Relief valve set by CPC to 3500 psi and vented into reservoir has COC Included.

2.5 (01) - 1" Full opening valve for introduction of hydraulic pressure from an alternate pump source.

2.6 Module is mounted on a steel skid designed to also accommodate mounting of Primary and Secondary Pump systems.

3.0 Primary Pump System

3.1 (2) - CPC BP4032 triplex reciprocating plunger pump. Pump has 1 ¼" plungers. Pump is specially designed for multiple HP ratings. CPC pump is equipped with a forged fluid end and crankshaft for added strength and load carrying capacity. CPC pumps come standard with Teflon/Kevlar packing, hard coated plungers and cartridge type disk valves.

3.2 (2)-30 HP Explosion Proof Motor, service factor 1.15 to allow for maximum ambient continuous running conditions of 40® C. Motor is 230/460 3 phase, 60 Hz, Nema Class 1 Div 1 on a 286 T frame. Pump is unitized to triplex with a poly-chain and clog system.

3.3 System is tied into an independent Hydro-electric pressure switch set to maintain system pressure between 2750 and 3150 psi.

3.4 System is fitted on suction side with strainers, isolation valves and suction valves, and on the discharge side with a check valve rated 5000 psi.

3.5 Each Motor must run on a separate electrical Buss. Primary Buss will serve as Primary Pumping system and the Emergency Buss will power the second triplex pump as the Pumping System to satisfy API 16D Sec 5.1.2.1.b.3.

4.0 Secondary Pump System

4.1 3- Speeflow air pumps. These pumps deliver a 40:1 pressure ratio. The large fluid end delivers 4 gpm per pump, at optimal working pressure. Operating independently this system will allow pressuring of the unit and closing of the Annular at API 16D time requirements. Total air consumption per pump is 40 SCFM per gallon of output @ 100 psi in.

4.2 System is controlled with hydro pneumatic pressure switch. This maintains unit pressure between 2750 and 3150 psi.

4.3 System suction side is regulated by a bypass gate valve and gate valves to isolate each air pump. System is plumbed on suction side with water trap and lubricator for the air, and suction valves and strainers for the fluid. Fluid discharge for each pump is plumbed with 5000 psi check valves.

5.0 CPC Siemens Series Interface module: 7S-315PNDP-A-115HMI-E

This module permits electro pneumatic remote control of the manifold functions from remote panel and supplies signals to the remote panel for function valve position indicator lights and alarms conditions. It is mounted on item1. This module should be meet API RP 16E 2.6 recommendations. Consists of:

Seven (07) Air cylinders complete with mounting brackets, plumbing items and fittings installed on the 4-way rotary shear seal valves on the manifold module for remote operation of the B.O.P stack functions. (Operating at min pressure of 60psi)
One (01) - Air cylinder complete with mounting brackets, plumbing items and fittings installed on the internal over ride valve for remote operation of the manifold regulator bypass function.
One (01) - annular regulator pneumatic drive installation kit. Consisting of:
1. One (01) - Air pressure regulator with gauge.
2. One (01) - failsafe motor for remote operation
3. Two (2) Quick exhaust valves
One (01) Float operated intrinsically safe top loading explosion proof switch installed in the fluid reservoir actuated by low fluid level. The switch is hardwired to the interface junction box using cable glands and armored cable rated for Div 1 hazardous area installation. The top loading design allows for replacement of switch without draining hydraulic fluid.
One (01) Explosion proof cast enclosure UL factory mutual or C.S.A approved NEMA type 7 meets N.E. C class 1, Group: D, Div 1 requirements. 24"H x 36"T x 8"D Containing:
1. Pressure transmitters for converting direct hydraulic pressure to electric signals for remote indication:
  1. Accumulator pressure (XP)
  2. Manifold regulated pressure (XP)
  3. Annular regulated pressure (XP)
  4. Air pressure (Internal)
2. Alarm devices for remote alarms:
  1. Low accumulator pressure
  2. UPS Alarm contact
  3. Pilot air supply pressure
  4. Low manifold Pressure
  5. Low level switch
  6. Motor Run
  7. BOP Interlock Alarm *
  * BOP interlock alarm is a N.O. contact that closes when either pipe ram is closed. It is not connected to any other ram (Blinds). It is not a failsafe alarm, meaning if the umbilical cable is not hooked up, or is unplugged, the alarm will not act. It will be routed to the driller's cabin over hard wires that will be connected to the Draw Works program by NDUSA approved electricians.
3. One (01) Alarm control circuit installed in the explosion proof enclosure. An alarm condition will cause the appropriate warning light illuminate and the horn to sound at the driller's panel. Depressing the alarm acknowledge switch on the Driller's panel will silence the horn and cause the warning light to remain on. The warning light remains lighted until the condition that caused the alarm is corrected.
4. One (01) - 10 amp fuses for over current protection.
5. One (01) - Explosion proof Cable gland for terminating one end of CPC Custom Armored and sheathed cable.
6. (1) 24VDC Regulated power supply
7. One internal UPS system for back up of interface, and remote system. 10amp, 24VDC UPS with internal 12:24VDC Converter. Lead Acid battery 12VDC, 26mAh Suitable for 2 hours of operation.
8. Local panel to include div 1 horn and Div 2 beacon.
9. position.
10. Local panel to have operators for On-Off, Alarm Reset, Low Level, Communication Loss, Low accumulator Pressure, & Low air Pressure

5.1 Driller's Touchscreen operated Remote Control Panel With alarm package with graphic illustration of BOP Stack Panel is designed for Class 1, Division 2 Hazardous Area installation. Consists of:

Siemens MP 377 15" HMI touch screen,
One (1) - pushbutton switch for master push and hold to operate. (Must be actuated to operate other functions).

NOTE: blind/shear rams station for that function will include a hinged cover to prevent inadvertent actuation. (See API RP 16E.2.5.2)
Four (4) - digital pressure displays indicating: BOP Pressures:
1. Accumulator pressure 0-6,000 psi.
2. Manifold regulated pressure 0-6,000 psi.
3. Annular regulated pressure 0-3,000 psi.
4. Air supply pressure 0-300 psi.
One (1) - alarm acknowledge pushbutton switch. An alarm condition will cause the appropriate warning menu item to maintain and the horn to sound at the driller's panel. Depressing the alarm acknowledge switch will silence the horn and cause the alarm to remain in the menu. The warning remains until the condition that caused the alarm is corrected.
One (1) - Amphenol receptacle for connecting the electric control cable.

5.2 Interconnect electric cable assembly.
This cable is a new item for CPC manufactured to our specifications. It is an armored and sheathed Type "P" cable with Profibus, Ethernet, and 12, 14awg single conductors. It will be fitted with One Amphenol 16 pin connector for connection on the rig floor, and will be hard wired at the main unit, and secured to the skid structure.

6.3 Fittings: 40 - schedule 160 1" XX Pipe Nipples Flat-face QD Suit cases BOP Hoses Addendum

This unit is manufactured at our facility in Houston Texas by technicians familiar with API closing unit requirements. All work compiled with original specifications utilizing CPC part numbers. Consolidated Pressure Control is an API 16D licensed facility. Warranty for unit is one year from commissioning into service not to exceed 18 months from delivery. This quote is acceptable from 90 days of issue date.

**Fluid requirements for unit based on calculations of Table 1.0 for requirements of unit having accumulated control fluid under atmospheric pressure. Usable fluid of bottles is equal to fluid required to Close/Open/Close all BOP Stack functions and close all valves. Final stack configuration must be provided by customer prior to work order to ensure proper sizing**

2.0 Accumulator Module E7S15.24

Addendum

Pressure Control is an API 16D licensed
3Tulsa Rig Iron Pumps
Horsepower Rating: 500
Stroke Length 6"
Maximum Piston 5"
Weight (approximate dry weight) 16,000
Construction Steel
Fluid Ends 3 Piece
Crankshaft Eccentric Type
Bearings Anti Friction Roller Bearings
Crosshead 1 Piece with Replaceable Slides
Lubrication Redundant: Force & Splash / Gravity

Drilling Equipment Sales, Inc., Your Home for Drill Rigs, Drilling Equipment, Water Trucks, Pump Hoists, Grouters, and parts and accessories for the drilling industry.

Home \| New Equipment \| Used Equipment \| Lifting Tools \| ProDrill DE500 \| Oil and Gas Rigs \| Gus Pech Equipment\| Mudslayer Watson Drill Equipment \| Specials \| Get A Quote \| Contact Us \| Our Customers